Removal

AXLE AND DIFFERENTIAL: DIFFERENTIAL MOUNT CUSHION: REMOVAL

AXLE AND DIFFERENTIAL: DIFFERENTIAL MOUNT CUSHION: REMOVAL

1. REMOVE REAR SUSPENSION MEMBER
HINT: Refer to the procedure up to Remove Rear Suspension Member Removal.

2. REMOVE REAR NO. 1 DIFFERENTIAL MOUNT CUSHION
(a) Using SST, remove the rear No. 1 differential mount cushion.

SST: 09316-12010
SST: 09570-24011
NOTICE:
- Do not bring SST into contact with the rear suspension member.
- Apply a small amount of grease to the threads of SST before use.
- Set SST in the correct direction.
- Do not slant the bolts of SST.
- Tighten the 2 bolts of SST equally into the 2 holes of the rear No. 1 differential mount cushion.
- Do not reuse the rear No. 1 differential mount cushion.

3. REMOVE REAR NO. 2 DIFFERENTIAL MOUNT CUSHION
(a) Using SST, remove the rear No. 2 differential mount cushion.