Installation

STEERING COLUMN: STEERING WHEEL: INSTALLATION

STEERING COLUMN: STEERING WHEEL: INSTALLATION

1. INSTALL STEERING PAD ATTACHING SCREW






(a) Install the 2 steering wheel pad attaching screws to the lower steering wheel boss cover.
2. INSTALL LOWER STEERING WHEEL BOSS COVER






(a) Engage the 2 claws to install the lower steering wheel boss cover to the steering wheel sub-assembly.






(b) Install the 2 screws.
3. INSTALL SHIFT PADDLE SWITCH Installation

4. INSTALL CRUISE CONTROL SWITCH WIRE
5. INSTALL CRUISE CONTROL MAIN SWITCH Installation

6. INSTALL STEERING PAD SWITCH ASSEMBLY Installation

7. INSTALL STEERING SHAKE DAMPER






(a) Install the steering shake damper to the steering wheel assembly.
(b) Install the 2 screws.
8. TURN FRONT WHEELS TO FACE STRAIGHT AHEAD
9. ADJUST SPIRAL CABLE Installation

10. INSTALL STEERING WHEEL ASSEMBLY






(a) Align the matchmarks on the steering wheel assembly and steering main shaft.
(b) Install the steering wheel assembly set nut.
Torque: 50 Nm (510 kgf-cm, 37 ft-lbf)
(c) Connect the connectors to the spiral cable sub-assembly.
11. INSTALL STEERING PAD Installation

12. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

13. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

14. INSPECT STEERING WHEEL CENTER POINT
15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

16. INSPECT STEERING PAD Installation

17. INSPECT SRS WARNING LIGHT Diagnosis System.