Removal

2UR-GSE ENGINE CONTROL: THROTTLE BODY: REMOVAL

2UR-GSE ENGINE CONTROL: THROTTLE BODY: REMOVAL

1. REMOVE ENGINE UNDER COVER
2. DRAIN ENGINE COOLANT Service and Repair

3. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY






(a) Loosen the 2 hose clamps and separate the 2 ventilation hoses.






(b) Disconnect the mass air flow meter connector and separate the wire harness clamp.






(c) Loosen the hose clamp and separate the air cleaner hose.






(d) Unlock the 2 clamps and remove the air cleaner cap sub-assembly.
5. REMOVE THROTTLE BODY ASSEMBLY






(a) Disconnect the throttle body connector.






(b) Loosen the hose clamp and separate the No. 5 water by-pass hose.






(c) Loosen the hose clamp and separate the No. 4 water by-pass hose.






(d) Remove the 2 bolts and 2 nuts.






(e) Using a "TORX" socket E6, remove the 2 stud bolts and throttle body assembly.
NOTICE: Do not damage the water hoses when removing the throttle body assembly.





(f) Remove the 2 water by-pass hoses.