Installation

EXTERIOR PANELS / TRIM: REAR SPOILER: INSTALLATION

EXTERIOR PANELS / TRIM: REAR SPOILER: INSTALLATION

1. INSTALL REAR SPOILER SUB-ASSEMBLY
HINT: When installing the spoiler, heat the vehicle body and spoiler using a heat light.

Heating Temperature





(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Clean the spoiler (if reusing the spoiler)
(1) Using a heat light, heat the spoiler.
(2) Remove the double-sided tape from the spoiler.
(3) Wipe off any tape adhesive residue with cleaner.
(4) Apply new double-sided tape to the spoiler.
(c) Install the spoiler.
(1) Using a heat light, heat the vehicle body and spoiler.
(2) Remove the peeling paper from the face of the spoiler.
HINT: After removing the peeling paper, keep the exposed adhesive free from foreign matter.
(3) Engage the 5 clips and install the rear spoiler sub-assembly.





(d) Install the 2 nuts.
2. INSTALL LUGGAGE COMPARTMENT DOOR COVER

3. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE Installation

4. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE Installation

5. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP