Rear Quarter Trim Panel

Rear Quarter Trim Panel

Removal





1 If installed, remove the loadspace lamp unit.
- Carefully release the lamp.
- Disconnect the electrical connector.




2 Release the liftgate seal.
3 Fold the seat assembly forwards.




4 Remove the door frame seal.




5
CAUTION: Do not remove clips by pulling on carpeted section of the quarter trim panel.
NOTE:
Note the fitted position.
Remove the lower quarter trim panel.
1) Release the 2 window clips using a firm grip on the vent grilles.
2) Release remaining 8 clips using a suitable tool.




6
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the 8 clips.

Installation
1 Install the clips.
2 Install the load space lamp unit.
- Connect the electrical connector.
3
NOTE:
Align to the position noted on removal.
Install the lower quarter trim panel
- Secure the clips.
- Install the access cover.
4 Install the liftgate seal.
5 Install the door seal.
6 Fold seat assembly rearwards.