Tire Pressure Monitoring System Front Antenna

Tire Pressure Monitoring System Front Antenna

Removal
1 Disconnect the battery ground cable. For additional information, refer to Specifications
2 Turn the steering on to full lock for access.




3 Release the front of the fender splash shield.
- Remove the 5 Torx bolts.
- Tie the splash shield aside.




4 Remove the tire pressure antenna.
- Disconnect the electrical connector.
- Remove the 2 clips.

Installation
1 Install the tire pressure antenna.
- Install the clips.
- Connect the electrical connector.
2 Install the fender splash shield.
- Tighten the Torx bolts.
3 Connect the battery ground cable. For additional information, refer to Specifications