Pedestrian Protection Hood Actuator RH

Pedestrian Protection Hood Actuator RH

Removal
1 Make the pedestrian protection system safe. For additional information, refer to Pedestrian Protection System Depowering and Repowering




2 Remove the air intake cover.
- Remove the 3 clips.
3 Release the pedestrian protection actuator bracket.
- Release the 3 wiring harness clips.
- Remove the 4 bolts.




4 Remove the pedestrian protection actuator and bracket.
- Disconnect the electrical connector.




5 Remove the pedestrian protection actuator.
- Remove and discard the 4 Torx bolts.

Installation
1 Install the pedestrian protection actuator.
- Tighten the new Torx bolts to 8 Nm (6 lb.ft).
2 Install the pedestrian protection actuator and bracket.
- Connect the electrical connector.
3 Secure the pedestrian protection actuator bracket.
- Attach the wiring harness clips.
- Tighten the bolts to 8 Nm (6 lb.ft).
4 Install the air intake cover.
- Carefully secure the clips.