Cowl Moulding / Trim: Service and Repair

Cowl Vent Screen

Removal

CAUTION: Always protect paintwork and glass when removing exterior components.




1 Remove the air intake cover.
- Remove the 3 clips.




2 Remove the brake master cylinder cover.
- Remove the 4 clips.
3 Remove the windshield wiper arms. For additional information, refer to Wiper Pivot Arm Service and Repair




4 Remove the plenum chamber panel.
- Release the retaining clip.
- Release the 3 clips.
- Disconnect the washer jet hose.

Installation
1 Install the plenum chamber panel.
- Connect the washer jet hose.
- Carefully secure the clips.
2 Install the air intake cover.
- Carefully secure the clips.
3 Install the brake master cylinder cover.
- Carefully secure the clips.
4 Install the windshield wiper arms. For additional information, refer to Wiper Pivot Arm Service and Repair