Loadspace Trim Panel [2-Door]

Loadspace Trim Panel

Removal





1 Remove the battery cover.
- Remove the 4 retainers.




2 Remove the loadspace floor panel.
3 Remove the tool kit tray.




4 Remove the spare wheel and tire.
- Remove the bolt.




5 Remove the scuff plate trim panel.
- Remove the 4 Torx bolts.




6 Remove the loadspace trim panel.
- Remove the clip.

Installation
1 Install the loadspace trim panel.
- Install the clip.
2 Install the scuff plate trim panel.
- Remove the 4 Torx bolts.
- Tighten the Torx screws to 10 Nm (7 lb.ft).
3 Install the spare wheel and tire.
- Install the retaining bolt.
4 Install the tool kit tray.
5 Install the loadspace floor panel.
6 Install the battery cover.
- Install the 4 retainers.