Front Door Window Motor: Testing and Inspection

Door Window Motor Initialization
1
NOTE:
After the battery has been disconnected it is necessary to initialize each door window motor separately to operate the "one-touch" up function.
Operate the window control switch until the door window glass is in the fully closed position, continue to operate the window control switch for a further two seconds.
2 Release the window control switch.
3 Operate the window control switch in the closed position and continue to operate the window control switch for a further two seconds.
4 Operate the window control switch until the door window glass is in the fully open position ("one-touch" down).
5
NOTE:
If the door window motor initialization has been completed correctly, when the window control switch is operated, the door window glass should move to the fully closed position ("one-touch" up) automatically.
NOTE:
If the door window glass does not fully close automatically ("one-touch" up), repeat the complete procedure.
Operate the window control switch once to the close position.
6 Repeat the door window motor initialization for each door window motor.