Removal and Replacement

Front Seat

Removal
1 Make the air bag supplemental restraint system (SRS) safe. For additional information, refer to Standard Workshop Practices Standard Workshop Practices




2
NOTE:
Right-hand shown, left-hand similar.
Position the front seat fully forwards.
- Lower the front seat head restraint to the fully lowered position.




3
NOTE:
Right-hand shown, left-hand similar.
Remove the safety belt lower anchor trim panel.




4
NOTE:
Right-hand shown, left-hand similar.
Release the safety belt lower anchor from the front seat.




5
NOTE:
Left-hand shown, right-hand similar.
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
Remove the 2 rear bolts from the front seat.
6 Position the front seat fully rearwards.




7
NOTE:
Left-hand shown, right-hand similar.
Remove the 2 front bolts from the front seat.
8 Reposition the front seat to the central position.
9 Disconnect the battery ground cable. For additional information, refer to Battery Disconnect and Connect Battery Disconnect and Connect





10 Disconnect the front seat harness electrical connectors.
- Tilt the front seat rearwards to aid disconnecting the front seat electrical connectors.





11
NOTE:
Make sure no damage is caused to the vehicle trim when removing the front seat.
NOTE:
Left-hand shown, right-hand similar.
Remove the front seat.

Installation





1 To install, reverse the removal procedure.
- TORQUE: 47 Nm




2
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
TORQUE: 47 Nm




3
NOTE:
Right-hand shown, left-hand similar.
TORQUE: 40 Nm