Rear Shelf: Service and Repair

Parcel Shelf
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures
For additional information, refer to TAS Symbol Glossary TAS Symbols Glossary
Removal

NOTE:
Removal steps in this procedure may contain installation details.
For additional information, refer to C-Pillar Trim Panel C-Pillar Trim Panel





Torque to: 12 Nm

















NOTE:
The procedure must be carried out on both sides of the seat.





NOTE:
The procedure must be carried out on both sides of the seat.

Torque to: 6 Nm













NOTE:
On installation, use a suitable tool to make sure that the parcel shelf is located underneath the rear window blind.





NOTE:
Do not disassemble further if the component is removed for access only.





















Installation
1 To install, reverse the removal procedure.