Upper Arm RH

Upper Arm RH

Removal
1
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2 Remove the front shock absorber. For additional information, refer to Front Shock Absorber Front Shock Absorber
3 Remove the secondary bulkhead panel RH. For additional information, refer to Secondary Bulkhead Panel RH Secondary Bulkhead Panel RH




4
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
Remove the upper arm retaining nut.




5
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
Remove the upper arm retaining nut.




6 Remove the upper arm.

Installation





1 Install the upper arm.




2
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
Install the upper arm retaining nut, but do not tighten fully at this stage.




3
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
Install the upper arm retaining nut, but do not tighten fully at this stage.
4 Install the front shock absorber. For additional information, refer to Front Shock Absorber Front Shock Absorber




5
CAUTION: The final tightening of the suspension components must be carried out with the vehicle on its wheels.
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
Tighten to 47 Nm.




6
CAUTION: The final tightening of the suspension components must be carried out with the vehicle on its wheels.
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
Tighten to 47 Nm.
7 Install the secondary bulkhead panel RH. For additional information, refer to Secondary Bulkhead Panel RH Secondary Bulkhead Panel RH