Radiator Cooling Fan Motor: Service and Repair

Cooling Fan Motor and Shroud
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures
For additional information, refer to TAS Symbol Glossary TAS Symbols Glossary
Removal

NOTE:
Removal steps in this procedure may contain installation details.
For additional information, refer to Battery Disconnect and Connect Battery Disconnect and Connect

WARNING: Make sure to support the vehicle with axle stands.
1 Raise and support the vehicle.
For additional information, refer to Radiator Splash Shield Radiator Splash Shield

NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.

2 Lower the vehicle.
For additional information, refer to Air Cleaner Outlet Pipe LH Air Cleaner Outlet Pipe LH
For additional information, refer to Air Cleaner Outlet Pipe RH Air Cleaner Outlet Pipe RH
For additional information, refer to Air Cleaner Outlet Pipe T-Connector Air Cleaner Outlet Pipe T-Connector
For additional information, refer to Air Cleaner RH Air Cleaner RH
For additional information, refer to Air Cleaner LH Air Cleaner LH

Torque to: 9 Nm

Torque to: 7 Nm

Installation
1 To install, reverse the removal procedure.