Diagnosis Procedure

RECLINING MOTOR

DRIVER SIDE : Diagnosis Procedure


1. CHECK RECLINING MOTOR POWER SUPPLY

1.Turn ignition switch OFF.
2.Disconnect reclining motor connector.
3.Check voltage between reclining motor harness connector and ground.





Is the inspection result normal?
YES- GO TO 3.
NO- GO TO 2.

2. CHECK RECLINING MOTOR CIRCUIT

1.Disconnect driver seat control unit connector.
2.Check continuity between reclining motor harness connector and driver seat control unit harness connector.





3.Check continuity between reclining motor harness connector and ground.





Is the inspection result normal?
YES- Replace driver seat control unit. Refer to "Removal and Installation" Removal and Installation.
NO- Repair or replace harness.

3. CHECK RECLINING MOTOR

Check reclining motor.
Refer to "DRIVER SIDE : Component Inspection" Component Inspection.
Is the inspection result normal?
YES- GO TO 4.
NO- Replace reclining motor. Refer to "Exploded View" Exploded View.

4. CHECK INTERMITTENT INCIDENT

Check intermittent incident.
Refer to "Intermittent Incident" Intermittent Incident.
- INSPECTION END