ST Ang Sen Sig

Description

Inputs the steering angle signal from steering angle sensor via CAN communication.


DTC Logic


DTC DETECTION LOGIC

NOTE:
If DTC U0126 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Suspension Control.






DTC CONFIRMATION PROCEDURE


1. SELF-DIAGNOSIS WITH PRE-CRASH SEAT BELT CONTROL UNIT

1.Turn ignition switch ON.
2.Check "Self-diagnostic result" with CONSULT.
Is DTC detected?
YES- .
NO- INSPECTION END


Diagnosis Procedure


1. CHECK DTC WITH "ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)"

Check "Self-diagnostic result" for "ABS" with CONSULT. Scan Tool Testing and Procedures.
Is DTC detected?
YES- Repair or replace malfunctioning parts.
NO- GO TO 2.

2. CHECK INTERMITTENT INCIDENT

Intermittent Incident.
- INSPECTION END