Front Pillar Garnish

BODY SIDE TRIM

FRONT PILLAR GARNISH : Removal and Installation


CAUTION:
- When removing, always use a remover tool that is made of plastic.
- Never damage the body.

REMOVAL

1.Remove front body side welt partially.





2.Insert a remover tool (A) into the clearance between front pillar garnish and vehicle body to make work space, and then cut the clips.
3.Pull up front pillar garnish to remove.






INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:
- When installing, check that all clips and pawls are securely fitted in panel holes on body, and then press clips and pawls in.
- Never reuse clips.