Removal and Installation

BATTERY TERMINAL WITH FUSIBLE LINK

Removal and Installation


REMOVAL

1.Remove trunk finisher front. Trunk Finisher Front.





2.Remove battery vent tube (1).
3.Remove 12V battery cover. Removal and Installation.
4.Disconnect the 12V battery cable from the negative terminal.

CAUTION:
To prevent damage to the parts, disconnect the 12V battery cable from the negative terminal first.
5.Remove cover of 12V battery positive terminal.
6.Remove harness mounting nuts and battery terminal with fusible link mounting nut.
7.Disconnect harness connector and remove battery terminal with fusible link.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
To prevent damage to the parts, connect the 12V battery cable to the positive terminal first.