Receiver Dryer: Service and Repair

CONDENSER

LIQUID TANK : Removal and Installation


REMOVAL

1.Remove condenser. Removal and Installation.
2.Clean liquid tank and its surrounding area. Then remove dust and rust from liquid tank.

CAUTION:
Be sure to clean carefully.
3.Remove mounting bolts from liquid tank, then remove liquid tank.

CAUTION:
To prevent the inclusion of foreign matter, cap or wrap the joint of the liquid tank and condenser with suitable material such as vinyl tape to avoid the entry of air.

INSTALLATION

Note the following items, and install in the reverse order of removal.

CAUTION:
- Check that liquid tank bracket is securely installed at protrusion of condenser. (Check that liquid tank bracket does not move to a position below center of liquid tank.)
- To prevent leakage of refrigerant, replace the O-ring with a new one. Apply a coat of compressor oil to the O-ring prior to installation.