P324C

Description

- As this DTC is activated at fail-safe, repair the DTC which has caused entry to fail-safe. Traction Motor Inverter.
- When this DTC is detected individually, perform .


DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


CAUTION:
- " " must be performed before starting "DTC CONFIRMATION PROCEDURE".
- Always drive vehicle at a safe speed.

1. PRECONDITIONING

If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
- GO TO 2.

2. CHECK DTC DETECTION

1.Set the vehicle to READY and wait for 10 seconds or more.
2.Fully open the accelerator and drive the vehicle by motor.
3.Stop the vehicle.
4.Check DTC.
Is "P324C" detected?
YES- Go to .
NO- INSPECTION END


Diagnosis Procedure


1. CHECK CONNECTION CONDITION

1.Turn ignition switch OFF.
2.Check the connection condition of the traction motor inverter harness connector.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace damaged parts.

2. CHECK DTC HIGH VOLTAGE SYSTEMS

1.Turn ignition switch ON and wait for 10 seconds or more.
2.Check DTC of the high voltage systems.
Were there any detected DTC related to a high voltage systems other than the traction motor inverter?
YES- Check DTC detected item.
NO- Replace the traction motor inverter. Removal and Installation.