Removal and Installation

COOLING FAN

Removal and Installation


REMOVAL

1.Remove reservoir tank. Exploded View.
2.Remove air cleaner case (LH). Exploded View (VQ-25HR) or Exploded View
(VQ-37VHR).
3.Disconnect harness connector from cooling fan control module, and move harness to aside.
4.Remove engine under cover with power tool.
5.Remove cooling fan assembly from under the vehicle.

CAUTION:
Be careful not to damage or scratch on radiator core.

INSTALLATION

Note the following, and install in the reverse order of removal.

CAUTION:
Only use genuine parts for cooling fan mounting bolt and observe the specified torque (to prevent core support from being damaged).