Removal and Installation

REAR PARCEL SHELF FINISHER

Removal and Installation


REMOVAL

1.Remove trunk front finisher upper. Removal and Installation.





2.Disconnect high-mounted stop lamp harness connector (A).
(without REAR SPOILER)
3.Remove rear seat cushion and rear seatback. Removal and Installation.
4.Remove rear kicking plate inner, rear wheelhouse garnish, rear pillar finisher. Removal and Installation.
5.Remove seatback center finisher mounting clips, and then remove seatback center finisher.
6.Remove rear seat belt floor anchor bolt and rear seat belt shoulder anchor bolt. Exploded View.





7.Remove rear parcel shelf finisher mounting clips (A).
8.Remove clips from rear of rear parcel shelf finisher, and then remove rear parcel shelf finisher.
9.Remove the following parts after removing rear parcel shelf finisher.
- Child anchor cover.
- Woofer grille.
- High-mounted stop lamp. (without REAR SPOILER) Removal and Installation.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
Check that clips are securely fitted in panel holes on body when installing, and then press them in.