Oil Pump

REPAIR FOR COMPONENT PARTS


Oil Pump


COMPONENTS











DISASSEMBLY





1. Remove oil pump housing from oil pump cover.





2. Remove oil pump housing oil seal using a flat-bladed screwdriver.

CAUTION:
Be careful not to scratch oil pump housing.





3. Remove O-ring from oil pump housing.





4. Remove O-ring from oil pump cover.

ASSEMBLY





1. Install O-ring to oil pump cover.

CAUTION:
- Never reuse O-ring.
- Apply ATF to O-ring.





2. Install O-ring to oil pump housing.

CAUTION:
- Never reuse O-ring.
- Apply ATF to O-ring.





3. Using the drift, install oil pump housing oil seal to the oil pump housing until it is flush.

CAUTION:
- Never reuse oil seal.
- Apply ATF to oil seal.





4. Install oil pump housing to oil pump cover.
5. Tighten bolts to the specified torque in numerical order shown in the figure after temporarily tightening them. Refer to "COMPONENTS".