AFS OFF Indicator Does Not Operate

ACTIVE AFS


AFS OFF Indicator Does Not Operate

1.CHECK DIAGNOSIS RESULT (AFS CONTROL UNIT)
Select "ADAPTIVE LIGHT" on CONSULT-III. Select "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.
Is DTC detected?
YES - Refer to Active AFS.
NO - GO TO 2.
2.CHECK DIAGNOSIS RESULT (UNIFIED METER AND A/C AMP.)
Select "METER A/C AMP" on CONSULT-III. Select "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.
Is DTC detected?
YES - Refer to Unified Meter and A/C AMP.
NO - GO TO 3.
3.CHECK AFS OFF INDICATOR SIGNAL (UNIFIED METER AND A/C AMP.)
CONSULT-III DATA MONITOR
1. Select "AFS OFF IND"of METER A/C AMP data monitor item.
2. With operating the AFS switch, check the monitor status.





OK or NG
OK - Replace combination meter.
NG - Replace unified meter and A/C amp.