Removal and Installation

IGNITION COIL


Removal and Installation


REMOVAL
1. Remove engine room cover (RH and LH). Refer to Component.
2. Remove engine cover with power tool. Refer to Component Removal and Installation.
3. Remove air cleaner case and air duct. Refer to Exploded View Removal and Installation.
4. Move aside harness, harness bracket, and hoses located above ignition coil.
5. Remove electric throttle control actuator. Refer to Component.
6. Disconnect harness connector from ignition coil.
7. Remove ignition coil.

CAUTION:
Never shock ignition coil.

INSTALLATION
Install in the reverse order of removal.