Self-Diag Result Mode

SELF-DIAG RESULT MODE

Operation Procedure
1. Perform "CONSULT-II Start Procedure". Refer to GI-38, "CONSULT-II Start Procedure". Testing and Inspection





2. Start engine and drive at 30 km/h (19 MPH) or more for approx. 1 minute.
3. Stop vehicle. With engine at idle, touch "SELF-DIAG RESULTS". Display shows malfunction experienced since the last erasing operation.

NOTE:
^ The details for "TIME" are as follow:
- "0": Error currently detected with AWD control unit.
- Except for "0": Error detected in the past and memorized with AWD control unit.
Detects frequency of driving after DTC occurs (frequency of turning ignition switch "ON/OFF").