Self-Diag Results

SELF-DIAG RESULTS

Operation Procedure
1. Touch "METER A/C AMP" on "SELECT SYSTEM" screen.
2. Touch "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.




3. Self-diagnosis results are displayed.

Display Item List - Self-Diag Results:

Display Item List

NOTE: "TIME" means the following.

- 0: Means detected malfunction at present. (From malfunction detection to turning ignition switch OFF)
- 1-63: Means detected malfunction in past. (Displays number of ignition switch OFF -> ON after detecting malfunction. "Self-diagnosis result" is erased when exceeding "63".)