Parking Brake Switch

Parking Brake Switch Circuit

INSPECTION PROCEDURE
1. CHECK PARKING BRAKE SWITCH








1. Turn ignition switch OFF and disconnect parking brake switch connector E110.
2. Check continuity between parking brake switch connector E110 and ground.
OK or NG
OK >> GO TO 2.
NG >> Parking brake switch is malfunctioning. Replace parking brake switch.

2. CHECK PARKING BRAKE SWITCH HARNESS








1. Disconnect ABS actuator and electric unit (control unit) connector E30.
2. Check continuity between parking brake switch connector E110 and ABS actuator and electric unit (control unit) connector E30.
OK or NG
OK >> INSPECTION END
NG >> Repair or replace malfunctioning components.