Cruise Test - Part 2

Cruise Test - Part 2

1. CHECK STARTING FROM D1
1. Move selector lever to "D" position.
2. Accelerate at half throttle.

With CONSULT-II
Read the gear position. Refer to AT-89, "DATA MONITOR MODE". Data Monitor Mode
Does it start from D1?
YES >> GO TO 2.
NO >> Enter a check mark at AT-190, "Vehicle Cannot Be Started From D1" on the AT-45, "DIAGNOSTIC WORKSHEET", then continue the road test. Example of Diagnosis Sheet

2. CHECK SHIFT UP D1 -> D2
Press the accelerator pedal down all the way and inspect whether or not the A/T shifts up (D1 -> D2) at the correct speed. Refer to AT-59, "Vehicle Speed at Which Gear Shifting Occurs". Vehicle Speed at Which Gear Shifting Occurs

With CONSULT-II
Read the gear position, throttle position and vehicle speed. Refer to AT-89, "DATA MONITOR MODE". Data Monitor Mode
Does the A/T shift up D1 -> D2 at the correct speed?
YES >> GO TO 3.
NO >> Enter a check mark at AT-192, "A/T Does Not Shift: D1 -> D2" on the AT-45, "DIAGNOSTIC WORKSHEET", then continue the road test. Example of Diagnosis Sheet

3. CHECK SHIFT UP D2 03
Press the accelerator pedal down all the way and inspect whether or not the A/T shifts up (D2 -> D3) at the correct speed. Refer to AT-59, "Vehicle Speed at Which Gear Shifting Occurs". Vehicle Speed at Which Gear Shifting Occurs

With CONSULT-II
Read the gear position, throttle position and vehicle speed. Refer to AT-89, "DATA MONITOR MODE". Data Monitor Mode
Does the A/T shift up D2 -> D3 at the correct speed?
YES >> GO TO 4.
NO >> Enter a check mark at AT-194, "A/T Does Not Shift: D2 -> D3" on the AT-45, "DIAGNOSTIC WORKSHEET", then continue the road test. Example of Diagnosis Sheet

4. CHECK SHIFT UP D3 -> D4 AND ENGINE BRAKE
When the A/T changes speed D3 -> D4, return the accelerator pedal.

With CONSULT-II
Read the gear position. Refer to AT-89, "DATA MONITOR MODE". Data Monitor Mode
Does the A/T shift up D3 -> D4 and apply the engine brake?
YES >> 1. Stop the vehicle.
2. Go to AT-59, "Cruise Test - Part 3".Cruise Test - Part 3
NO >> Enter a check mark at AT-196, "A/T Does Not Shift: D3 -> D4" on the AT-45, "DIAGNOSTIC WORKSHEET", then continue the road test. Example of Diagnosis Sheet
Go to AT-59, "Cruise Test - Part 3".Cruise Test - Part 3