Self-Diagnosis

Self-Diagnosis

OPERATION PROCEDURE
1. Turn ignition switch OFF.
2. Perform "CONSULT-II Start Procedure". Refer to GI-37, "CONSULT-II Start Procedure". With Manufacturer's Scan Tool
3. Touch "SELF-DIAG RESULTS".
4. The self-diagnostic results are displayed. (Touch "PRINT" to print out the self-diagnostic results if necessary.) Check RAS warning lamp if "NO FAILURE" is displayed.
5. Perform the appropriate inspection from the display item list, and repair or replace the malfunctioning component. Refer to STC-23, "DISPLAY ITEM LIST". Display Item List