Inspection 13: RAS Control Unit Circuit (With RAS)

Inspection 13: RAS Control Unit Circuit (With RAS)

INSPECTION PROCEDURE
1. CHECK SELF-DIAGNOSIS RESULTS





Check self-diagnosis results.
Is above displayed on the self-diagnosis display?
YES >> GO TO 2.
NO >> INSPECTION END

2. CHECK RAS CONTROL UNIT CIRCUIT
1. Perform RAS control unit self-diagnosis. Repair or replace items indicated, then perform RAS control unit self-diagnosis again. Refer to STC-28, Self-Diagnosis. Self-Diagnosis
2. Perform ABS actuator and electric unit (control unit) self-diagnosis.
OK or NG
OK >> INSPECTION END
NG >>
^ Repair or replace malfunctioning components.
^ Perform the self-diagnosis, and make sure that the result shows NO DTC IS DETECTED. CONSULT-II / Self-Diagnosis