Engine Cannot Be Started In "P" or "N" Position

Engine Cannot Be Started in "P" or "N" Position

SYMPTOM:
^ Engine cannot be started with selector lever in "P" or "N" position.
^ Engine can be started with selector lever in "D" or "R" position.

DIAGNOSTIC PROCEDURE
1. CHECK PNP SWITCH CIRCUIT
Perform self-diagnosis. Refer to "SELF-DIAGNOSTIC RESULT MODE". Self-Diagnostic Result Mode
Refer to "TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS)". TCM Self-Diagnostic Procedure (No Tools)
Do the self-diagnostic results indicate PNP switch?
YES >> Check malfunctioning system.
NO >> GO TO 2.
2. CHECK CONTROL LINKAGE
Check control linkage.
OK or NG
OK >> GO TO 3.
NG >> Adjust control linkage.
3. CHECK STARTING SYSTEM
Check starting system.
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.