CAN Communication Line
CAN Communication LineDIAGNOSTIC PROCEDURE
^ Check the following if CAN COMM CIRCUIT [U1000] is detected in self-diagnostic results of CONSULT-II.
1. CHECK CAN COMMUNICATION CIRCUIT
With CONSULT-II
1. Turn ignition switch ON and start engine.
2. Select SELF-DIAG RESULTS mode for ALL MODE AWD/4WD with in CONSULT-II.
3. Perform the self-diagnosis. Displaying & Reading Trouble Codes
Is the CAN COMM CIRCUIT [U1000] displayed?
YES >> Print out CONSULT-II screen and go to LAN-3, Precautions When Using CONSULT-II. Precautions When Using CONSULT-II
NO >> INSPECTION END