Cruise Test Part 2
Cruise Test Part 21. CHECK STARTING FROM D1
1. Move selector lever the D position.
2. Accelerate at half throttle.
With CONSULT-II
Read the gear position. Refer to DATA MONITOR MODE.
Does it start from D1 ?
YES >> GO TO 2.
NO >> Enter a check mark at Vehicle Cannot Be Started From D1 on DIAGNOSTIC WORKSHEET, then continue the road test.
2. CHECK SHIFT-UP D1 -> D2
Press the accelerator pedal down all the way and inspect whether or not the transmission shifts up (D1 -> D2) at the correct speed.
Refer to Vehicle Speed at Which Gear Shifting Occurs.
With CONSULT-II
Read the gear position, throttle position and vehicle speed. Refer to DATA MONITOR MODE.
Does the A/T shift up D1 -> D2 at the correct speed?
YES >> GO TO 3.
NO >> Enter a check mark at A/T Does Not Shift: D1 -> D2 on DIAGNOSTIC WORKSHEET, then continue the road test.
3. CHECK SHIFT-UP D2 -> D3
Press the accelerator pedal down all the way and inspect whether or not the transmission shifts up (D2 -> D3) at the correct speed.
Refer to Vehicle Speed at Which Gear Shifting Occurs.
With CONSULT-II
Read the gear position, throttle position and vehicle speed. Refer to DATA MONITOR MODE.
Does the A/T shift up D2 -> D3 at the correct speed?
YES >> GO TO 4.
NO >> Enter a check mark at A/T Does Not Shift: D2 -> D3 on DIAGNOSTIC WORKSHEET, then continue the road test.
4. CHECK SHIFT-UP D3 -> D4 AND ENGINE BRAKE
When the transmission changes speed D3 -> D4, return the accelerator pedal.
With CONSULT-II
Read the gear position. Refer to DATA MONITOR MODE.
Does the A/T shift up D3 -> D4 and apply the engine brake?
YES >> Stop the vehicle. Go to AT-64, Cruise Test Part 3. Cruise Test Part 3
NO >> Enter a check mark at A/T Does Not Shift: D3 -> D4 on DIAGNOSTIC WORKSHEET, then continue the road test. Go to AT-64, Cruise Test Part 3. Cruise Test Part 3