Procedure 1 Checking SRS Operation
Diagnostic Procedure 1SRS Operation Check
Checking Air Bag Operation by Using "AIR BAG" Warning Lamp - User Mode
1. After turning ignition switch from "OFF" to "ON", "AIR BAG" warning lamp operates.
2. Compare "AIR BAG" warning lamp operation to the chart.
NOTE: If "AIR BAG" warning lamp operates differently from the operations shown above, refer to "DIAGNOSTIC PROCEDURE 6".
Checking Seat Belt Pre-tensioner Operation by Using "Seat Belt" Warning Lamp - User Mode
1. After turning ignition switch from "OFF" to "ON", "SEAT BELT" warning lamp operates.
Part 1:
Part 2:
2. Compare "SEAT BELT" warning lamp operation to the chart.