High Mount Stop Lamp Replacement (SUV)

High Mount Stop Lamp Replacement (SUV)

Removal Procedure

1. Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement (SUV) (Service and Repair).




2. Disconnect the electrical connector from the high mounted stop lamp.
3. Remove the retaining screws.
4. Remove the grommet from the liftgate.
5. Remove the lamp, with the attached harness, from the vehicle.

Installation Procedure

1. Install the lamp, with the attached harness, to the vehicle.




2. Install the grommet to the liftgate.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the retaining screws.

Tighten the screws to 3 Nm (26 lb in).

4. Connect the electrical connector to the high mounted stop lamp.
5. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement (SUV) (Service and Repair).