Rear Seat Replacement (without AL4)

Rear Seat Replacement (without AL4)

Removal Procedure




1. Fold the seat forward.
2. Grab the seat back cushion filler panels and pull up to release the clips.
3. Disconnect the electrical connectors, if equipped.
4. Remove the 3 covers that cover the nuts on the front of the seat frame.
5. Remove the seat retaining nuts.
6. Fold the seat cushions back to the closed position.




7. With the help of an assistant, remove the seat from the vehicle.

Installation Procedure




1. Install the seat into the vehicle.
2. Fold the seat cushions forward.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the seat retaining nuts.

Tighten the nuts to 55 Nm (41 lb ft).

4. Install the 3 covers that cover the nuts on the front of the seat frame.
5. Connect the electrical connectors, if equipped.




6. Install the rear seat cushion filler panels by pushing downward to fully engage the clips.
7. Fold the seat cushion back to the closed position.