Removal and Replacement

Starter Removal and Installation

Removal

1. Do the 12 volt battery terminal disconnection procedure Procedures.

2. Remove the air cleaner Service and Repair.

3. Disconnect the positive starter cable (A) and the harness connector (B) from the S terminal, then remove the heater hose bracket (C).





4. Remove the two bolts securing the starter, then remove the starter.

Installation

1. Install the starter, then tighten the starter mounting bolts (A).





2. Connect the positive starter cable (B) and the harness connector (C) to the S terminal, then install the heater hose bracket (D). Make sure the crimped side of the ring terminal is facing out.

3. Install the air cleaner Service and Repair.

4. Do the 12 volt battery terminal reconnection procedure Procedures.