HFL Switch Test

HFL Switch Test

SRS components are located in this area. Review the SRS component location Locations, and the precautions and procedures Service and Repair in the SRS section before doing repairs or service.

1. Remove the HFL-navigation voice control switch (with navigation) Voice Control Switch Replacement or HFL switch (without navigation) HFL Switch Replacement.






2. Measure the resistance between terminals No. 3 and No. 4 in each switch position according to the table.

HFL-Navigation Voice Control Switch (with navigation)





HFL Switch (without navigation)





3. If the resistance is not as specified, replace the switch.

- With navigation Voice Control Switch Replacement
- Without navigation HFL Switch Replacement