Windshield Side Trim Replacement

Windshield Side Trim Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program, 888-424-6857

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the body or the related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- Take care not to damage the windshield.
- Do not use any metallic tools to remove the windshield area of the windshield side trim, or you may chip or crack the windshield.

1. Apply protective tape (A) to the body.






2. Pull up the upper portion of the windshield side trim (B) and slide it upward along the front pillar to remove the clips (C). The clips will stay in the body holes.

3. Remove the clips (A) from the body by turning them 90 °.






4. Detach the hooks (B), then remove the clip (C) from the body.

5. Install the clips on the windshield side trim, and fit the clips into the hole in the body. Then push on the trim until the clips snap into place securely, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.