Leak Detection Solenoid: Service and Repair

EVAP Canister Vent Shut Valve Replacement

1. Raise the vehicle on a lift Service and Repair.

2. Remove the bolts (A), then remove the canister guard (B).






3. Disconnect the EVAP canister vent shut valve connector (A), then remove the harness clip (B).





4. Remove the cap (C).

5. Remove the EVAP canister vent shut valve (D).

6. Install the parts in the reverse order of removal with new O-rings (E) and a new cap.

NOTE: Do not coat the O-rings with engine oil.