Side Defogger Vent Trim Removal/Installation

Side Defogger Vent Trim Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program, 888-424-6857

NOTE:

- Take care not to scratch the dashboard or the related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

Driver's side

1. Remove the driver's side defogger vent trim (A).

1. Pry out the rear edge of the trim to detach the hooks (B) with the appropriate trim tool.

2. Pull out the upper edge of the trim, then pull it out.





2. Install the trim in the reverse order of removal, and push the hooks into place securely.

Passenger's side

1. Remove the passenger's dashboard panel Passengers Dashboard Panel Removal / Installation.

2. Remove the passenger's side defogger vent trim (A).

1. Pry the rear edge of the trim to detach the hooks (B) with the appropriate trim tool.

2. Pull the panel rearward.





3. Install the trim in the reverse order of removal, and push the hooks into place securely.