Rocker Arm And Shaft Disassembly/Reassembly

Rocker Arm and Shaft Disassembly/Reassembly

NOTE:

- Identify each part as it is removed so that each item can be reinstalled in its original location.
- Inspect the rocker arm shaft and the rocker arms Rocker Arm And Shaft Inspection.
- If reused, the rocker arms must be installed in the their original locations.
- Bundle the rocker arms with rubber bands to keep them together as a set, and remove the bands after the rocker arms have been installed.
- Remove the rocker shaft bolt before removing the rocker shaft from the No. 5 rocker shaft holder.
- Prior to reassembling, clean all the parts in solvent, dry them, and apply new engine oil to any contact points, the bearing surfaces.
- When replacing the rocker arm assembly, remove the fastening hardware from new rocker arm assembly.
- When reassembling the rocker arm and shaft assembly, position the arrows on the rocker shaft holders facing the cam chain side.