Rocker Arm Assembly Installation

Rocker Arm Assembly Installation

1. If the rocker arm assembly is disassembled, reassemble the rocker arm assembly Rocker Arm And Shaft Disassembly/Reassembly.

2. Install the oil control orifice (A) with a new O-ring (B), then install the rocker arm assembly (C).





3. Install the lost motion assembles (D) and the lost motion holder (E).

NOTE: Apply new engine oil to the lost motion assembly.

4. Tighten each bolts two turns at a time in sequence.









5. Adjust the valve clearance Adjustments.

6. Install the cylinder head cover Cylinder Head Cover Installation.