Fuel Pressure Regulator: Service and Repair

Fuel Pressure Regulator Replacement

1. Remove the fuel tank unit Fuel Tank Unit Removal/Installation.

2. Remove the bracket (A).





3. Remove the ground ring (B).

4. Remove the fuel pressure regulator (C).

5. Install the parts in the reverse order of removal with new O-rings (D) and a new bracket (A). When installing the fuel tank unit, align the marks on the unit and the fuel tank Fuel Tank Unit Removal/Installation.

NOTE: Coat the O-rings with clean engine oil; do not use any other oil.
Do not pinch the O-rings during installation.