Brake Pedal Assy: Service and Repair

Brake Pedal Replacement

1. Disconnect the brake pedal position switch connector (A).





2. Disconnect the brake pedal stroke sensor connector (B).

3. Remove the lock pin (C) and the clevis pin (D).

4. Remove the brake pedal bracket mounting bolt (E) and nuts (F).

5. Remove the brake pedal with bracket (G).

6. Remove the brake pedal position switch (H) by turning it 45° counterclockwise.

7. Install the brake pedal in the reverse order of removal.

NOTE: Make sure movement of the brake pedal and the brake pedal stroke sensor.

8. Do the brake pedal and brake pedal position switch adjustment Adjustments.

9. Do the sensor 0 (zero) position memorization Programming and Relearning.