A/T Shift Lever Removal

A/T Shift Lever Removal

1. Remove the center console Center Console Removal/Installation.

2. Move the shift lever to N.

3. Remove the nut (A) securing the shift cable end (B).






4. Rotate the socket holder (A) on the shift cable (B) a quarter turn; the corner (C) on the socket holder will be in the opening (D) of the shift lever bracket base (E). Then slide the socket holder to remove the shift cable from the bracket. Do not remove the shift cable by pulling the shift cable guide (F).






5. Disconnect the shift lock solenoid/park pin switch/A/T gear position indicator panel light connector (A).





6. Remove the bolts (B) and the nuts (C), then remove the shift lever assembly (D).