Reverse Idler Gear Installation

Reverse Idler Gear Installation

1. Lightly coat the reverse idler gear shaft (A), the needle bearing (B), and new O-rings (C) with lithium grease.

2. Assemble new O-rings and the needle bearing on the reverse idler gear shaft, then install the reverse idler gear shaft in the reverse idler gear shaft holder (D). Align the D-shaped (E) cut out of the shaft with the D-shaped area (F) of the holder.






3. Install the reverse idler gear in the transmission housing in the direction shown.






4. Install the reverse idler gear shaft/holder assembly in the reverse idler gear.

5. Secure the holder with the bolts.