Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Rocker Arm and Shaft Disassembly/Reassembly (PZEV Models)




Rocker Arm and Shaft Disassembly/Reassembly

NOTE:

- Identify each part as it is removed so that each item can be reinstalled in its original locations.
- Inspect the rocker arm shaft and rocker arms Rocker Arm and Shaft Inspection (PZEV Models).
- If reused, the rocker arms must be installed in the original locations.
- When removing, or installing the rocker arm assembly, do not remove the camshaft holder bolts. The bolts will keep the holders and rocker arms on the shaft.
- Prior to reassembling, clean all the parts in solvent, dry them, and apply new engine oil to any contact points.
- Bundle the rocker arms with rubber bands to keep them together as a set.
- When replacing the VTEC rocker arm assembly, remove the fastening hardware from the new VTEC rocker arm assembly.