Trunk / Liftgate Latch: Service and Repair

Trunk Lid Latch Replacement

1. Remove the trunk lid trim. Interior Trim Removal/Installation - Trunk Lid

2. Disconnect the cylinder rod from the lock cylinder. Service and Repair

3. Disconnect the trunk lid opener cable (A), and disconnect the trunk lid latch switch connector (B). Take care not to bend the opener cable.

Power trunk lid latch





Manual trunk lid latch with security switch





4. Remove the bolts from the trunk lid latch (A).






5. Pull the trunk lid latch (A) out, and disconnect the cylinder rod (B) from the trunk lid latch. Take care not to bend the cylinder rod.
NOTE: If the rod fastener (C) is damaged or stress-whitened, replace it with a new one.






6. Install the latch in the reverse order of removal, and note these items:
- Replace the rod fastener if it is damaged.

- Make sure the connector is plugged in properly and the opener cable is connected properly.

- Make sure the trunk lid opens properly and locks securely.

- If the trunk latch does not operate properly, adjust the position of the cable end (A) on the latch.